Code Development Guidelines¶
This document describes the coding requirements and guidelines to be followed during the development of PlasmaPy and affiliated packages.
Code written for PlasmaPy must be compatible with Python 3.6 and later.
- PlasmaPy follows the PEP8 Style Guide for Python Code. This style choice
helps ensure that the code will be consistent and readable.
- The PEP 8 Speaks integration on GitHub will comment when there are any departures from the PEP 8 style guide.
- PEP 8 compliance may be checked locally using pycodestyle.
- Line lengths should be chosen to maximize the readability and elegance of the code. The maximum line length for Python code in PlasmaPy is 99 characters.
- Docstrings and comments should generally be limited to 72 characters.
- Follow the existing coding style within a subpackage.
- Use standard abbreviations for imported packages when possible, such
import numpy as np,
import matplotlib as mpl,
import matplotlib.pyplot as plt, and
import astropy.units as u.
__init__.pyfiles for modules should not contain any significant implementation code, but it can contain a docstring describing the module and code related to importing the module. Any substantial functionality should be put into a separate file.
- Use absolute imports, such as
from plasmapy.mathematics import Fermi_integral, rather than relative imports such as
from ..mathematics import Fermi_integral.
- For multiline imports, instead of using
\to break lines, wrap the imported names in
()parentheses and use consistent whitespace.
Optional[type]for type hinted keyword arguments with a default value of
- There should be at most one pun per 1284 lines of code.
PlasmaPy has a configuration for
pre-commit that takes care of style mostly
automatically. Install it with
pip install pre-commit, then use
install within the repository.
This will cause git to run an automated style checking suite, mostly composed
black, on every commit. Do note that this works better with
git add, then
git commit workflow than a
git commit -a workflow - that
way, you can check via
git diff what the automated changes actually did.
flake8 does not change your files automatically (help in setting
that up, if possible, most welcome!).
Branches, commits, and pull requests¶
Before making any changes, it is prudent to update your local repository with the most recent changes from the development repository:
git fetch upstream
Changes to PlasmaPy should be made using branches. It is usually best to avoid making changes on your master branch so that it can be kept consistent with the upstream repository. Instead we can create a new branch for the specific feature that you would like to work on:
git branch *your-new-feature*
Descriptive branch names such as
adding-eigenfunction-poetry are helpful, while vague names like
edits are considered harmful. After creating your branch locally,
let your fork of PlasmaPy know about it by running:
git push --set-upstream origin *your-new-feature*
It is also useful to configure git so that only the branch you are working on gets pushed to GitHub:
git config --global push.default simple
Once you have set up your fork and created a branch, you are ready to make edits to PlasmaPy. Switch to your new branch by running:
git checkout *your-new-feature*
Go ahead and modify files with your favorite text editor. Be sure to include tests and documentation with any new functionality. We recommend reading about best practices for scientific computing. PlasmaPy uses the PEP 8 style guide for Python code and the numpydoc format for docstrings to maintain consistency and readability. New contributors should not worry too much about precisely matching these styles when first submitting a pull request, as the PEP8 Speaks GitHub integration will check pull requests for PEP 8 compatibility, and further changes to the style can be suggested during code review.
You may periodically commit changes to your branch by running
git add filename.py git commit -m "*brief description of changes*"
Committed changes may be pushed to the corresponding branch on your GitHub fork of PlasmaPy using
git push origin *your-new-feature*
or, more simply,
Once you have completed your changes and pushed them to the branch on GitHub, you are ready to make a pull request. Go to your fork of PlasmaPy in GitHub. Select “Compare and pull request”. Add a descriptive title and some details about your changes. Then select “Create pull request”. Other contributors will then have a chance to review the code and offer contructive suggestions. You can continue to edit the pull request by changing the corresponding branch on your PlasmaPy fork on GitHub. After a pull request is merged into the code, you may delete the branch you created for that pull request.
Good commit messages communicate context and intention to other developers and to our future selves. They provide insight into why we chose a particular implementation, and help us avoid past mistakes.
Suggestions on how to write a git commit message:
- Separate subject from body with a blank line
- Limit the subject line to 50 characters
- Capitalize the subject line
- Do not end the subject line with a period
- Use the imperative mood in the subject line
- Wrap the body at 72 characters
- Use the body to explain what and why vs. how
- All public classes, methods, and functions should have docstrings using the numpydoc format.
- Docstrings may be checked locally using pydocstyle.
- These docstrings should include usage examples.
Warnings and Exceptions¶
- Debugging can be intensely frustrating when problems arise and the associated error messages do not provide useful information on the source of the problem. Warnings and error messages must be helpful enough for new users to quickly understand any problems that arise.
- “Errors should never pass silently.” Users should be notified when problems arise by either issuing a warning or raising an exception.
- The exceptions raised by a method should be described in the method’s docstring. Documenting exceptions makes it easier for future developers to plan exception handling.
- Code within PlasmaPy must use SI units to minimize the chance of
ambiguity, and for consistency with the recognized international
standard. Physical formulae and expressions should be in base SI
- Functions should not accept floats when an Astropy Quantity is expected. In particular, functions should not accept floats and make the assumption that the value will be in SI units.
- A common convention among plasma physicists is to use electron-volts (eV) as a unit of temperature. Strictly speaking, this unit corresponds not to temperature but is rather a measure of the thermal energy per particle. Code within PlasmaPy must use the kelvin (K) as the unit of temperature to avoid unnecessary ambiguity.
- PlasmaPy uses the astropy.units package to give physical units to
- All units packages available in Python presently have some limitations, including incompatibility with some NumPy and SciPy functions. These limitations are due to issues within NumPy itself. Many of these limitations are being resolved, but require upstream fixes.
- Dimensionless units may be used when appropriate, such as for certain numerical simulations. The conventions and normalizations should be clearly described in docstrings.
Equations and Physical Formulae¶
- If a quantity has several names, then the function name should be
the one that provides the most physical insight into what the
quantity represents. For example,
gyrofrequencyindicates gyration, whereas
Larmor_frequencyindicates that this frequency is somehow related to someone named Larmor. Similarly, using
omega_ceas a function name will make the code less readable to people who are unfamiliar with this particular notation.
- Physical formulae should be inputted without first evaluating all of the physical constants. For example, the following line of code obscures information about the physics being represented:
>>> omega_ce = 1.76e7*(B/u.G)*u.rad/u.s # doctest: +SKIP
In contrast, the following line of code shows the exact formula which makes the code much more readable.
>>> omega_ce = (e * B) / (m_e * c) # doctest: +SKIP
The origins of numerical coefficients in formulae should be documented.
Docstrings should describe the physics associated with these quantities in ways that are understandable to students who are taking their first course in plasma physics while still being useful to experienced plasma physicists.
SI units that were named after a person should not be capitalized except at the beginning of a sentence.
Some plasma parameters depend on more than one quantity with the same units. In the following line, it is difficult to discern which is the electron temperature and which is the ion temperature.
>>> ion_sound_speed(1e6*u.K, 2e6*u.K) # doctest: +SKIP
Remembering that “explicit is better than implicit”, it is more readable and less prone to errors to write:
>>> ion_sound_speed(T_i=1e6*u.K, T_e=2e6*u.K) # doctest: +SKIP
SI units that were named after a person should be lower case except at the beginning of a sentence, even if their symbol is capitalized. For example, kelvin is a unit while Kelvin was a scientist.
Unit conversions involving angles must be treated with care. Angles
are dimensionless but do have units. Angular velocity is often given
in units of radians per second, though dimensionally this is
equivalent to inverse seconds. Astropy will treat radians
dimensionlessly when using the
dimensionless_angles does not account for the multiplicative
2*pi that is used when converting between frequency (1 /
s) and angular frequency (rad / s). An explicit way to do this
conversion is to set up an equivalency between cycles/s and Hz:
>>> from astropy import units as u >>> f_ce = omega_ce.to(u.Hz, equivalencies=[(u.cy/u.s, u.Hz)]) # doctest: +SKIP
dimensionless_angles does work when dividing a velocity
by an angular frequency to get a length scale:
>>> d_i = (c/omega_pi).to(u.m, equivalencies=u.dimensionless_angles()) # doctest: +SKIP
Examples in PlasmaPy are written as Jupyter notebooks, taking advantage of their mature ecosystems. They are located in docs/notebooks. nbsphinx takes care of executing them at documentation build time and including them in the documentation.
Please note that it is necessary to store notebooks with their outputs stripped (use the “Edit -> Clear all outputs” option). This accomplishes two goals:
- helps with versioning the notebooks, as binary image data is not stored in the notebook
nbsphinxthat it should execute the notebook.
In the future, verifying and running this step may be automated via a GitHub bot. Currently, reviewers should ensure that submitted notebooks have outputs stripped.
If you have an example notebook that includes packages unavailable in the
documentation building environment (e.g.,
bokeh) or runs some heavy
computation that should not be executed on every commit, keep the outputs in
the notebook but store it in the repository with a
preexecuted_ prefix, e.g.
PlasmaPy has a set of asv benchmarks that monitor performance of its functionalities. This is meant to protect the package from performance regressions. The benchmarks can be viewed at benchmarks. They’re generated from results located in benchmarks-repo. Detailed instructions on writing such benchmarks can be found at asv-docs. Up-to-date instructions on running the benchmark suite will be located in the README file of benchmarks-repo.